Azpects Jointing paving Grout - MUSHROOM - 12.5kg Jointing Compound

£9.9
FREE Shipping

Azpects Jointing paving Grout - MUSHROOM - 12.5kg Jointing Compound

Azpects Jointing paving Grout - MUSHROOM - 12.5kg Jointing Compound

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

Making hard landscaping even easier because the product is best installed in wet conditions; rain or shine, it goes in fine. Due to the structural requirements of a driveway and that generally, the bedding mix is stronger than that of a patio or path, the use of EASY Joint is not recommended. It’s packed full of useful tips and techniques on the best way to use our range of tiling tools and accessories.

Most of our branches have a heavy goods vehicle (road access and weight limits need to be considered) with some branches having smaller vehicles.Our instructions state that any sagging of a joint must be topped up whilst it is still wet (or has not cured). A strong joint that will resist the elements and stand the test of time - better than traditional jointing methods. The result of using EASYJoint, to joint your paving, will be a paving gap that is completely filled without the need for kneeling and compressing the material by hand that will last for years. Aspects' EASYJoint Select range gives you four additional colours to choose from too - Bronze, Carbon, Tungsten and Jet Black.

Azpects EASYJoint is the original sweep-in jointing Compound and still the best truly "All Weather Paving Joint Compound" available and made in the UK. Do not be tempted to use brick acid on paving, it will damage the paving and possibly the paving joint. A stronger mix may cause the base to become impermeable and this will mean that water does not drain away. Moreover, it is strong enough that weather won't affect it throughout the years—it will remain resilient no matter what. Due to the high cost of haulage/transport, it is our policy not to uplift any goods that have been delivered.EASY Joint is a natural product, because dirty water can drain through the joint, over time the appearance may change, this will not affect the integrity of the product. This ensures the top of the filler is below the top rounded edge of the paving and helps it adhere to the base and sides of the paving material.

To ensure a strong joint that will last for years the depth of the joint should be at least 20mm deep. The problem is that if you try to top up a joint it will not bond properly with the existing joint and over time the joint will fail. The landscaper applied the product without water and said this is the best way as the product is activated by the air and not water. If using the wet method, ensure that the bedding mix is permeable and made up from a mix no stronger of 6 parts sharp sand to one cement. Simply simply soak the paving with water before you start and then sweep and wash the jointing compound into the joints, letting the water take the strain.EASYJoint grout is ideal for all types of paving such as natural stone, granite setts and concrete flags providing there is a gap of at least 3mm wide and 25mm deep. Apply a final rinse of water across the surface to wash off any EASY Joint residue and to aid the final compaction process. It is easier to use EASY Joint with two people, one of them to sweep the compound and the other one to spray the water. The end results will be a perfect joint that is fully filled without need for kneeling and compressing the material by hand that will last for years and years. It is important to note that linseed oil staining is only a temporary stain and exposure to sunlight, will over time, lift the marks and fade away.

Both have sand binder in them and work in similar ways however EASYSeal BCS is the superior product and lasts longer. Water helps the user to sweep our paving compound around the patio, it also allows the compound to compact itself into the joints. I then went to the youtube video - and it was soon obvious that they had missed one vital step out of the what I thought where clear instructions - MIX IT TO A SLURRY. I followed the instructions to the letter, so was confused 3 days later when it was only JUST starting to harden.Save any left-over product by simply placing back in the tub and submerging in a minimum of 2" (50mm) or more of water. You must follow the instructions carefully when using porcelain tiles and depending on whether they are for indoor or outdoor use, be careful what bedding mix they are laid on.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop