New Door Restore | Restore Colour and Appearance of Faded Composite uPVC Doors | 250ml

Product Information

Autumn Statement: State pension confirmed to rise by 8.5% from April 2024 – while some benefits will go up by 6.7% The main reason why traditional wooden doors need to be painted, sealed, and treated is that timber absorbs a lot of water. This leads to mould and rot developing which results in the need for a replacement door.

Once the paint is applied, you'll need to add a layer of beeswax or another product to protect the paint. This will also give it an attractive finish. These include Edwardian front doors, Victorian doors, 1920s front doors, arched doors, Anglian doors, Georgian doors, cottage doors, and much more. To keep your door looking shiny and new, you should give it a good scrub every few months with soapy water and a microfiber cloth. Be sure to rinse the door afterwards and dry it completely to avoid any water spots. Then you can follow the steps we covered in the section above and repaint your door with either the same or a different colour of your choice. If the paint you're using needs a primer then you'll apply this layer first. You'll then add one or two coats of paint to the door. A second coat can often make the job look more even and professional.Apply primer to metallic and bare wood areas. It is best to use oil-based paint for a perfect finish. Polytrol is simple to apply using a cloth or soft brush and is ready to wipe off in just 10 minutes! Applying the Polytrol to a wet surface will not produce the desired effect and could negatively impact the door. Most exterior doors come with a built-in drainage system, using slots and holes in the bottom of the door’s threshold to ensure excess water runs off and stays outside your home.

When someone arrives at your home, your front door is one of the first things that they’ll see. A tired, faded front door can make even the most beautiful of homes seem a little neglected. You can use Dilunett to remove the previous orange-brown coating, however, Dilunett is powerful enough to remove up to 8 coats of paint in one application, so any other coats of paint that lay underneath the new paint will also be removed. If you want to bring the whole look of your house together, we highly recommend painting your window frames in the same colour as your door.NatWest, Royal Bank of Scotland (RBS) and Ulster Bank, which are all part of the NatWest Group, will now shut at least 172 of their bank branches in 2023 and 2024. Remove any door furniture, such as handles or letter boxes, and apply masking tape around any glass windows as well as the door frame. Always start with a dry door, free of debris. This will help ensure that you don't miss any spots when cleaning. Tip: If your front door has mildew on it, just scrub it with a 50:50 bleach and water solution and leave to stand for about 10 minutes, before rinsing. If the door is only lightly soiled, a simple wash with warm soapy water, a gentle scrub and thorough rinse might be all that is needed.

The door didn’t take us longer than 20 minutes so we could do it all in one go but if it will take you any longer than 20 minutes, you will need to work within areas that can be completed within this time-frame.

What Is the Best Way to Clean Composite Doors?

Maintenance is due when a Polytrol treated surfaces shows signs of fading. Prepare and re-treat surfaces as directed above. Clean Up Afterwards, rinse the door thoroughly with clean water. You can try using gentle rubbing alcohol if you have any stubborn stains. Clean all around the frame, as this can affect how the door opens.